Brake_Repair_Tools AU-2-89

25 products in this product line

Piston Detaching Tool ( for a motor vehicle)

This tool is purpose designed to detach a piston from the disk brake base of a motor vehicle

The adjusting screw design; which is able to adjust the distance between two grasping portions and make the outer walls of the two holding blocks firmly press the inner wall of the piston; allows the operator convenient to replace a piston or a washer with a new one

Capacity: 16.5mm-40.0mm

Packing: 1 pc/slide on card; 48sets / 12.5kgs / 13.5kgs / 1.4'
Brake And Clutch Cable Injector (For a motor vehicle)

This tool is purpose designed to fix the brake and clutch cable when injecting the lubrication oil

Packing: 1 pc/slide on card; 240sets / 10kgs / 12kgs / 1.8'
Disk Brake Piston Compressor (4 Pistons)

Special wider pusher design to use on 4 pistons vehicle

Max. working range: 88mm

Applicable: BENZ, BMW and 4 Pistons Vehicle

Packing: 12sets / 20.2kgs / 20.7kgs / 1.9'
High Quality Brake Tool Set

High quality brake tool set, brake repair tool, auto repair tool.

15 parts; in plastic case with soft foam insert.

For brake maintenance / repair.
Brake Spring Pliers

For glued and riveted brake linings

With movable claw

Surface chrome-plated
Brake Spring Pliers

For installing and removing the brake shoe recuperating spring on riveted brake linings.

Surface chrome plated.
Brake Calliper Brush

For removal of brake dust and dirt from the brake calliper.

For vehicles with disc brakes.

Slim design.

Plastic handle with suspension hole.
Brass Brake Callipers Brush

For cleaning aluminium brake callipers.

Soft brass bristles facilitate damage-free cleaning.

Slim design - allows working in areas with restricted access.

Plastic handle with suspension hole.
Special Tool for Brakes

For installing and removing spring plates and the holding device of brake linings on drum brakes; e.g. on VW; SEAT; SKODA; OPEL and RENAULT with rear drum brakes.

Push- and turn-part with carbide coating layer in front working area.

Plastic handle.

Chrome vanadium.

Surface chrome plated.
Brake Callipers File

Extra slim style (width 10 mm); especially appropriate for Japanese vehicles.

For removal of brake dust; rust and dirt from the brake calliper.

With integrated flat scraper at the front end for removing crude residues.
Brake Line Flare Nut Wrench

For screwed connections on brake lines at the front
and rear axle.

Straight design for the operation of the brake line screwing at the front axle.

Offset design for the safe operation of the brake line screwing at the rear axle.

Anti-slipping.

Reinforced design.

Straight slot / with 10x11 6-point.

Chrome vanadium.

Surface chrome plated.
Brake Line Flare Nut Wrench

For screwed connections on brake lines at the front
and rear axle.

Straight design for the operation of the brake line screwing at the front axle.

Offset design for the safe operation of the brake line screwing at the rear axle.

Anti-slipping.

Reinforced design.

Straight slot / with 10x12 6-point.

Chrome-Vanadium.

Surface chrome-plated.

Brake Repair Tools