Engine Repair Tools

257 products in this product line
  • Valve Stem Oil Seal Service Kit
    Valve Stem Oil Seal Service Kit
    • This kit is essential for renewing the Valve Stem Seals without removing the cylinder head on Audi vehicles with 20v engines.
    • Comprising compressor unit assembly with Valve Spring Holding Tool; Pressure Hose and Valve Stem Seal Replacer.
     

  • Diesel Injector Seat Cutter Set
    Diesel Injector Seat Cutter Set
    • Identify injector "blow-by" exists (see previous page for possible symptoms).
    • Gain access to the injectors and remove them.
    • Select required reamer onto pilot post and tighten internal hex screw.
    • Place assembled cutter into injector recess.
    • Using the T bar and socket supplied apply only a small amount of pressure whilst turning the cutter in a clockwise direction only. Use a small amount of light lubricant whilst performing the cut to reduce chattering and help give a flat cut. Do not over cut the seat only remove enough metal to form a good seat.
    • Thoroughly clean the seat and remove all swarf.
    • Fit injectors as per manufacturers instructions.

  • Timing Tools ( Ford Diesel Engines )
    Timing Tools ( Ford Diesel Engines )
    • Engine timing tool for American car diesel engines of engine repair tool.
    • 1.8 TDDI / TDCI FIESTA / FOCUS TURBO.
    • 1.8 TDDI / TDCI & TRANSIT / TRANSIT CONNECT.
     

  • Timing Tool Kit ( for 1.8 Turbo & 1.6 FSI Chain Engines )
    Timing Tool Kit ( for 1.8 Turbo & 1.6 FSI Chain Engines )

    Engine timing tool kit (for 1.8 turbo & 1.6 FSI chain engines), engine repair tools, auto repair tool.

     

  • Valve Spring Compressor
    Valve Spring Compressor
    • CITROEN BERLINGO 1.1/ 1.4 (1994-2004).
    • PEUGEOT 106/ 205/ 206/ 306/ 307/ 405/ PARTNER (1993-2004).
    • CITROEN XSARA 1.4/1.6 (1994-2004).
     

  • Timing Tool Kit
    Timing Tool Kit
    • Engine timing tool kit, engine repair tools, auto maintenance tool.
    • For FORD 1.4 & 1.6 TDCI engine.
     

  • 6pcs Timing Tool Kit
    6pcs Timing Tool Kit
    • Hight quality 6pcs engine timing tool set of auto maintenance tool.
    • Application: For FORD, FIESTA, FOCUS, MAX, TOURNED, TRANSIT, 1.8TDDL.
     

  • Engine Timing Tool Set - FIAT & OPEL
    Engine Timing Tool Set - FIAT & OPEL
    • This comprehensive set of tools enables the correct engine timing to be made when replacing the timing belt.
    • Applicable: FIAT & OPEL
     

  • 6pcs Injector Puller (for Bosch Injector system of Mercedes Benz)
    6pcs Injector Puller (for Bosch Injector system of Mercedes Benz)
    • For removing adapted tight common rail injectors without having to disassemble cylinder head.
    • Use for Mercedes - Benz CDI engines 611,612,613 etc.
    • Injection puller with impact hammer, injection nozzles that do not fit very tightly can be pulled out without needing to take them apart or remove the cylinder block.

  • 7pcs Injector Puller ( for Bosch Injector System of Mercedes Benz)
    7pcs Injector Puller ( for Bosch Injector System of Mercedes Benz)
    • For removing adapted tight common rail injectors without having to disassemble cylinder head.
    • Use for Mercedes - Benz CDI engines 611.612.613;etc.
    • Injection puller with impact hamme, injection nozzles that do not fit very tightly can be pulled out without needing to take them apart or remove the cylinder block.

  • Slide Hammer Type Injector Nozzle Puller
    Slide Hammer Type Injector Nozzle Puller
    • Can use for Mercedes CDI engines OM 611, 612, 613...etc.
    • Injection nozzles that do not fit very tightly can be pulled out without. Needing to take them apart or remove the cylinder block.
    • The specialty design; the puller is additionally supported by the steel ball on the valve cover, which prevents the puller from tipping during the removal process.

  • Volkswagen Timing Tool
    Volkswagen Timing Tool
    • Engine timing tool for German car of auto repair tool.
    • For PERTO 1.8 / 1.8T.
    • With automatic tensioner(belt) chain in head.