Motorcycle Repair Tool

Portable tyre changer, suitable for all wheel and tyre sizes.

• Simply locate the swivel onto front or rear axle, then press the support frame from vertical position to horizontal with floor, the wheel is then raised & supported to enable service work to be carried out.
• Dual casters on frame allow for easy positioning.
• Capacity: 450kg
• Height: 450mm
• Length: 738mm
• Width: 570mm

• Simply locate the swivel onto front or rear axle, then press the support frame from vertical position to horizontal with floor, the wheel is then raised & supported to enable service work to be carried out.
• Dual casters on frame allow for easy positioning.
• Capacity: 250Kg
• Height: 410mm
• Length: 635mm
• Width: 480mm

• Place split spigot into bearing hole then select the correct size taper punch and drive into the split spigot to expand it to firmly grip the bearing. Bearing can then be driven from the housing.
• Set contains seven spigots and two taper punches to expand the spigots.
• Spigot size: 10mm, 12mm, 15mm, 17mm, 19mm, 20mm, 25mm
• Punch size: 10mm x 250mm(L), 15mm x 400mm (L)

Auto repair tools motorcycle repair tools heavy duty valve spring compressor set.

• Fit internal hex on many late model sport bikes and some off-road applications.
• Four metric hex sizes: 17, 19, 22 and 24mm.
• 3/8" square drive on both ends.

• Clutch spring check tool, clutch compression tool, scooter tools, auto bike tools, auto cycle tools, motorcycle repair tools.
• Clutch spring check tool for 50-250cc engines with diameter 125-155mm pulley.

• Brush chains.
• Chain size can be used to # 415 ~ # 630.
• Each of the brush can be removed.
• 3 side brushes are adjustable to fit the width of the chain.

• Works on  passenger car; motorcycle and industrial tyres.
• Quality drop forged and tempered alloy steel.
• Length: 11" (280mm)
• Width: 1" (25mm)

• Motorcycle chain puller, hand puller, scooter tools, autobike tools, autocycle tools, motorcycle tools.
• Motorcycle Chain Puller, Size: 428, 520, 525, 528, 530

• 4 jaw configurations – 45 degree, 90 degree, 180 degree & flat.
• Application: Use with internal and external snap rings.
• Effective range: 10-50mm(3/8"-2")

• Headlight adjusting and brake spring hook tool, motorcycle tools, autobike tools.
• This tool made from heat treated alloy steel is especially designed for removing and installing hard to reach headlight adjusting springs. OAL 6”(152mm).