VW and Audi Strut Nut Socket

  • VW and Audi Strut Nut Socket
    Enlargement
    VW and Audi Strut Nut Socket
    Product No : 087-AT-155

    • Because the top shock retaining nut on VW and Audi FWD cars is recessed inside the strut tower; conventional methods for removing and installing it just won't work. The 1-3/4" long socket reaches down into the recess and fits the slot in the top of the nut. Center bore allows you to use a hex key to hold the strut shaft from turning; and the 7/8" (22mm) hex can gripped with a wrench.
    • Packing: 1pc / 144pcs / 13kgs / 14kgs / 1.2'

    Product Introduction
    • Because the top shock retaining nut on VW and Audi FWD cars is recessed inside the strut tower; conventional methods for removing and installing it just won't work. The 1-3/4" long socket reaches down into the recess and fits the slot in the top of the nut. Center bore allows you to use a hex key to hold the strut shaft from turning; and the 7/8" (22mm) hex can gripped with a wrench.
    • Packing: 1pc / 144pcs / 13kgs / 14kgs / 1.2'
    Back