Automotive Repair Tools

Transmission Axle Holder Wrench use for 2005 & later LAND ROVER with V-8 engines.

• Use for damage bolt remover.
• Do not use with air tools.

• Use for damage bolt remover.
• Do not use with air tools.

• Use for damage bolt remover.
• Do not use with air tools.

• Use for damage bolt remover.
• Do not use with air tools.

• Use for damage bolt remover.
• Do not use with air tools.

• Use for damage bolt remover.
• Do not use with air tools.

• Suitable for most Self Adjusting Clutches SAC(3 and 4 holes) equipped on vehicles of FIAT GROUP, VW-AUDI, BMW, MERCEDES, VOLVO, OPEL, RENAULT etc.
• Allows operations on clutch equipped with this device in order to prevent any damage to system and to keep adapter ring in right position.

• Universal application: VW-Audi, Seat, Škoda, Opel / Vauxhall Ford, BMW, Mercedes, Peugeot, Citroën, Renault, Fiat, Japanese vehicles, etc.
• Loosen the retaining bolt and extract the Pulley.
• Suitable for all Pulleys with holes with a PCD diameter from 70mm - 100mm. Suitable for hole diameter from minimum 20mm.
• To lock the Pulley while loosening or tightening the retaining bolt, as well as preventing the Pulley from rotating during extraction. Any available 1/2" ratchet or extension drive may be used as the reaction tool.

Pulley Extractor and Reaction Tool suitable for VW-Audi, Seat, Škoda, Opel/Vauxhall Ford, BMW, Mercedes, Peugeot, Citroën, Renault, Fiat, Japanese vehicles, etc.

The T-handle design can through the windscreen silicone easily and quickly.

• Camshaft Setting Plate used to hold both camshafts at TDC position when replacing timing belt.