219 products in this product line
  • 4 in 1 E-ring Tool Set
    • The 4 in 1 E-ring Tool Set are extremely useful during construction and maintenance of R/C models.
    • Size: 6mm, 7mm, 8mm, 9mm.
     

  • Mechanic
    • Professional quality for mechanic.
    • Sensitive Instrument.
    • Provides a fast and easy way to locate noises in engines or bearing and other moving parts.
    • Plastic ear phones shut off outside noises.
    • Aluminum ally probe/needle for finding exact location of specific noises.
    • High quality surgical PVC & rubber parts for increased sound definition.
    • Instrument is shocked proof.
    • Ideal for pinpointing unusual vibration or suspected leaks (valves, piston rings, gaskets...etc).
    • Supplied with rubber trumpet for checking vacuum & pressure flow.
    • Useful for synchronizing multi carburetors.

  • Car Fuel Line Pliers
    • For VOLKSWAGEN AUDI group.
    • For use on three ended hose clips which are fitted to: AUDI/ SEAT/ SKODA/ VOLKSWAGEN fuel lines clamps.
    • Clamping range 28-18mm.
     

  • Batteries Cap Screwdriver

    Batteries Cap Screwdriver is special design for remove the caps on batteries before you filling the batteries.

  • Wire Starter
    • With wire starter, starting wire is no longer a problem without wire starter braided wire can be almost impossible to put through urethane so you can start cutting. Solid wire can also be hard to start it the urethane is wide.
    • To use wire starter just push the hollow stainless steel tube through the urethane, insert the wire through the, pull wire starter out and your wire is in.
    • Be sure to lay the flat side of the aluminum handle against the glass and then use your thumb or fingers to push the tube through the urethane. Also, be sure to concentrate your force directly in line with the tube. Failure to follow these directions may result in the tube bending.

  • Injector Puller for VAG
    • Specially designed for TDI-PD systems.
    • Slide hammer with special PD puller.
    • Supplied with Vice Clamp suitable for use with traditional injectors.
     

  • BMW Outside Mirror Removal Pliers
    • Use to remove the retainer on the outside mirror.
    • Applicable: BMW E12, E21, E23, E24, E28, E30, E31, E32, E34, E36, E38, E39.

  • Pulley Extractor and Reaction Tool
    • Universal application:VW Audi, Seat, SKODA, OOEL / VAUXHALL FORD, BMW, MERCEDES, PEUGEOT, CITROEN, RENAULT, FIAT, Japanese vehicles, etc.
    • Loosen the retaining bolt and extract the Pulley.
    • Suitable for all Pulleys with holes with a PCD diameter from 70 mm - 100 mm.
    • Suitable for hole diameter from minimum 20 mm.
    • To lock the Pulley while loosening or tightening the retaining bolt, as well as preventing the Pulley from rotating during extraction. Any available 1/2" ratchet or extension drive may be used as the reaction tool.

  • Reaction Tool
    • Applicable for MERCEDES MOTOR Z.B. M112, M113 and OM642...etc.
    • For counter holding the crankshaft belt pulley when screwing and unscrewing the central crankshaft bolt.

  • Puller Set
    • Auto repair tools of Puller Set. 
    • Suitable for : VW AUDI, ALFA ROMEO, BMW, CITROEN, FIAT FORD, MAZDA, MERCEDES, OPEL, PORSCHE, RENAULT, SEAT, SKODA...etc.
     

  • Slide Hammer

    Auto repair tools of Slide Hammer.

     

  • Ball Joint Puller Bell Vibro Impact
    • Application Truck: Hino, Isuzu, Nissan, Fuso
    • Size: Dr. 3/4", 62 mm
    • Weight:15 - 35 Ton