Automotive Repair Tools

• Quickly and easily install stretch belt found on many late model vehicles.
• These drive systems do not have a tensioner and require the proper installation tools to avoid damage to belts.
• Applications: BMW, Volvo, Mercedes, Mazda.

• Applicable: VW, Audi, Seat, Skoda, Mercedes, and Renault
• Bits size: M8, M10, M12, T30, T40, T45, T50

• Installation example VW-Audi, Ford, Peugeot, Volvo, etc.
• Applicable for 1-12 cylinder engines - two up to four-valve technology, in-line-engines or V-engines.
• This tool permits renewal of valve-stem oil-seals with the cylinder head removed or cylinder head assembled.
• The retaining flanges are rotatable, so that they may be affixed to the cylinder head lengthways, sideways or diagonally.
• The correct height of the supporting rod may be adjusted due to the adjustment spindles on the left and right side, to achieve the correct angle between handle and the pressure piece for compressing the valve-spring.
• Moveable rests allow infinitely adjustment of the tool length and therefore a universal application for 1-12 cylinder engines.

• For Mercedes CDI engines.
• Suitable for Mercedes CDI engines OM 611, 612 and 613.
• The glow plug tool set enables the correct removal of burnt and/or stuck due to corrosion or torn off glow plugs as well as the repair of the glow plug retaining thread.
• The cylinder head does not have to be removed.
• Note: Screwing the compressed air adapter into the injector nozzle bore and injecting compressed air into the combustion chamber prevents dirt and metal particles from entering the combustion chamber.

• Identify injector "blow-by" exists (see previous page for possible symptoms).
• Gain access to the injectors and remove them.
• Select required reamer onto pilot post and tighten internal hex screw.
• Place assembled cutter into injector recess.

• Color coded brake gauge identifies thickness levels for lining inspection.

• Open and close easily by turning the pliers by 180^o.
• For clamping multi use CLIC type hose clamps.
• Swivel jaws for use in areas with restricted access.
• Suitable for Audi, Citroen, Fiat, Mercedes, Opel, Vauxhall, Peugeot, Renault, SMART, VW. Etc.

• A comprehensive set of 13 wrench adapters and extension handle with locking system.
• Tool is universally suitable.
• Specially designed for use in very confined spaces.
• For releasing the bolts used on tensioner, timing, and auxiliary pulleys.
• Double ended adapters: 12, 13, 14, 15, 16, 17, 18, 19mm.
• Single ended adapter: E10, 12, 14, 16, 18.

Hail damage, door dings and other cosmetic damage are quickly massaged out with this extensive 33 tool profit center.

• For the removal of dents in a car's body without damaging the finish.
• Ideal for removing small dents and damaging caused by hail.

• For separating quick disconnect fittings on fuel and cooler lines.
• Unique offset design allows for access in confined or obstructed areas.
• Easy, one handed operation.

• 3/8" Dr. 10 pcs MM Crowfoot Wrenches Set
• Size: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm